Heat pump technology has established itself as a key standard in the German heating market. While the technology was predominantly found in new builds just a few years ago, it is now also gaining increasing relevance in the refurbishment of existing properties. According to figures from the Federal Association of the German Heating Industry, heat pumps accounted for almost half of all wet central heating systems sold in 2025. In the first half of 2026, this share climbed to 55 per cent. Conversely, sales of new gas heating systems fell significantly: while their market share was around 60 per cent in 2023, it dropped to 44 per cent in 2025 and to 38 per cent in the first half of 2026. Oil and biomass heating systems now hold virtually no market significance.
Decisive for this transition are the continuous efficiency gains achieved by the equipment. According to information from Zukunft Altbau, an initiative funded by the Baden-Wuerttemberg Ministry of the Environment, the efficiency of air-to-water heat pumps in existing buildings has increased by around ten per cent over roughly ten years. A four-year research project by the Fraunhofer Institute for Solar Energy Systems ISE, which examined 77 systems in existing one- to three-family houses, proves this trend: the average seasonal performance factor improved from 3.1 previously to 3.4. Thus, an average of 3.4 kilowatt-hours of heat are generated from one kilowatt-hour of electricity. This reduced carbon dioxide emissions in 2024 by an average of 64 per cent compared to comparable gas heating systems.
Economic viability and technical requirements in existing stock
A widespread assumption that heat pumps necessarily require underfloor heating was refuted by the investigations of Fraunhofer ISE. The decisive factor for cost-effective operation is primarily a low flow temperature of the heating water. This can also be achieved with conventional radiators, provided their heating surface is sufficiently dimensioned. Supplementary insulation measures on the building envelope can further reduce the required flow temperatures.
Modern heat pumps also prove advantageous in a long-term cost comparison. A survey by Fraunhofer ISE from the summer of 2026 compared the acquisition, operating and maintenance costs over a 20-year lifecycle for a single-family and a multi-family house. Taking future blending quotas of renewable gases into account, gas heating systems proved considerably more cost-intensive. For the examined single-family house, the total cost advantage of the heat pump amounted to up to 49,000 euros, depending on the scenario. Against this backdrop, Frank Hettler from Zukunft Altbau emphasises that property owners do not need to postpone a technology change, as properly planned systems are already amortising today.
Significant reduction in noise emissions
In parallel with energy performance, manufacturers have made considerable progress in sound insulation. While units in the six to twelve kilowatt output category often reached sound power levels of 70 decibels around 15 years ago, modern systems are usually noticeably below 60 decibels. Optimised fans and low-vibration compressors have contributed to this. Since January 2026, a threshold of at most 60 decibels has applied to state subsidies in this output category, which the majority of current models comply with. In addition, climate-friendly refrigerants such as propane are increasingly being used.
- —Precise dimensioning of the system by specialist contractors to suit the specific heat load of the building
- —Avoidance of sound reflections by maintaining sufficient clearance between the outdoor unit, house walls and windows
- —Use of enlarged radiators to ensure low flow temperatures without underfloor heating
- —Availability of additional noise protection measures such as acoustic enclosures where plot conditions are confined
Switching to future-proof heating systems marks an important factor for the capital preservation of residential properties. However, the decisive element in realising technical potentials remains professional planning that precisely considers not only the appropriate installation location, but also the hydraulic integration into the existing building.














